Tungsten Electrode - Abicor Binzel AUT-WIG 20G Instructivo De Servicio

AUT-WIG
6.1.1 AUT-WIG 20G/400W
1
7
1 Gas nozzle
2 Gas diffuser
3 Torch body
Fig. 1
1 Unscrew retaining nut (6) from guide tube (4).
2 Insert collet (5) into guide tube (4) and secure it with the retaining nut (6).
3 Screw guide tube (4) into torch body (3).
4 Screw gas diffuser (2) into torch body (3).
5 Insert the tungsten electrode (7) into the torch body (3) from the front.
6 Screw gas nozzle (1) onto gas diffuser (2).
7 Set tungsten electrode (7) to the required length and fasten it to the guide tube (4).
6.1.2 AUT-WIG 200W
1
Gas nozzle
2 Gas diffuser
Fig. 2
1 Screw collet (4) with gas diffuser (2) into torch body.
2 Insert the tungsten electrode (5) into the torch body (3) from the front and tighten it with the
gas diffuser (2).
3 Screw gas nozzle (1) onto gas diffuser (2).

6.2 Tungsten electrode

The electrode type is set by EN ISO 6848. The max. length of electrode depends on the type
of torch.
 3.1 Technical Data on page EN-5
BAL.0166 • 2019-01-03
2
4
5
6
Equipping the 20G/400W
1
5
3
Torch body
4 Collet
Equipping the AUT-WIG 200W
6
Guide tube
Collet
Retaining nut
2
6 Putting into operation
3
7 Tungsten electrode
3
4
5
Tungsten electrode
4
5
EN - 9