Abicor Binzel AUT-WIG 20G Instructivo De Servicio página 35

AUT-WIG
12 Disposal
When disposing of the system, local regulations, laws, provisions, standards and guidelines
must be observed. Observe the regulations on the disposal of electronic scrap and dispose of
it at your local waste disposal site.
 11 Dismounting on page EN-16
12.1 Materials
This product is mainly made of metallic materials which can be melted in steel and iron works
and are, thus, almost infinitely recyclable. The plastic materials used are marked in preparation
for sorting and separation of the materials for later recycling.
12.2 Materials
This product consists for the most part of plastics, steel and non-ferrous metals. Steel and non-
ferrous metals can be molten in steel and iron works and are thus almost infinitely recyclable.
The plastics materials used are marked in preparation for sorting and separation of the materials
for later recycling.
12.3 Consumables
Oils, greases and cleaning agents must not contaminate the ground and not enter the waste
systems. These materials must be stored, transported and disposed of in suitable containers.
Please observe the relevant local regulations and disposal instructions of the safety data sheets
given by the manufacturer of the consumables. Contaminated cleaning tools (brushes, rags,
etc.) must also be disposed of in accordance with the information provided by the manufacturer
of the consumables.
12.4 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability
to recycle packaging materials is always considered during their selection.
BAL.0166 • 2019-01-03
12 Disposal
EN - 17