NSS CHARGER 2022 ABLT Instrucciones Originales página 6

Battery Charger
The battery charger is located in the middle of the rear
of the control column.
 This high efficiency battery charger is designed for
onboard operation.
Hour Meter & Fuse Holder
 The hour meter is located on the left side of the
control column and counts the hours the pad motor is
on. The hour meter is used for indicating
maintenance intervals. The hour meter cannot be
reset.
 See maintenance section for maintenance intervals.
 The fuse holder is located under the Hour Meter. It
houses a 2 AMP fuse. The fuse is in the Battery
Charger lockout circuit. The machine will not turn on
without the fuse.
Key Switch
 A Key Switch is Optional and will be located on the
top of the control column to the left of the handle
when installed. The key switch and master switch will
both need to be used to turn the machine on and off.
Circuit Breaker
 There is one master circuit breaker located on the
right side of the control column.
Brush Head
 The Pad Motor, Filter Bag and Flexiwall Shield are
located at the front of the machine.
 The bag connects directly to the Flexiwall shield and
has a snap that retains the rear of the bag.
Retaining Strap
 The retaining strap should be used during storage,
transporting, pad changing and maintenance of
machine.