Setting The Watering Day Schedule; Setting A Calendar Schedule - Toro TMC-212 Manual Del Usuario

Setting the Watering Day Schedule

Note: For each program, you can select Calendar, Inter-
val Odd, Even or Off. To set a Calendar schedule, con-
tinue here. To set an Interval schedule see page 23. To
set an Odd or Even schedule see page 24. To turn Off
a program, see page 26.

Setting a Calendar Schedule

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
CAL (Calendar) is not displayed, press the +/
–/ button as needed to select CAL.
OFF
Press the button. The watering days currently
NEXT
set for this program will be displayed.
will begin flashing.
To select Sunday as a watering day, press the +/
button. To remove Sunday from the schedule, press
the –/ button;
OFF
ing. Continue to select or remove each day of the
week until only the desired watering days are shown
6. To set a Calendar schedule for another program,
repeat all of the steps beginning at step
When you have completed setting the Calendar
schedule for each program (as needed) return the
control dial to the
22
WATERING DAYS
switch setting. If necessary,
(Sunday)
SU
(Monday) will now begin flash-
MO
.
position.
RUN
Note: Each program can have its own Calendar,
Interval or Odd/Even schedule, but only one schedule
can be active at a time for that program. The watering
or
ON
day schedule or OFF shown in the display when the
control dial is in the
be the current schedule for that
program.
ON
3 2
7
5
4
WATERING DAYS
3 5
4
3 5
position, will