Watering Control Features; Pause Watering; Cancel Watering; Skip Stations - Toro TMC-212 Manual Del Usuario

Watering Control Features

Once the sprinkler system is running, the following man-
ual control features become available:

Pause Watering

Press the +/ and the –/
ON
• The station will temporarily turn off.
• The Watering On
• The display will show the amount of station time
remaining.
Note: If watering is not resumed within 8 minutes,
all watering operations will be canceled and the
controller will return to the automatic mode.
To resume operation, press the
• Watering activity will resume from the point of
interruption.

Cancel Watering

Two methods of canceling watering are available:
Press the +/ and –/
ON
two times.
• All watering operations will be canceled and the con-
troller will return to the automatic mode.
Note: Placing the control dial in the
two seconds, then back to
also cancel all watering operations.
32
buttons at the same time.
OFF
symbol will begin flashing.
button.
NEXT
buttons at the same time -
OFF
position for
OFF
will
RUN
To Skip Stations:
Press the button one time.
NEXT
• The station currently watering will shut off and the
next station will start.
• If the last station is skipped, the program will end.
If additional programs have been set to operate,
the next program in alphabetical order will start.
To Adjust the Station Run Time:
Press the +/ button to increase run time or the –/
ON
button to decrease run time.
• If the station run time is decreased to less than
1 minute, the station will shut off. The next station
in sequence will start.
• The station run time is changed during this operation
only. The program memory will not be changed.
OFF