Tractel guard trac Manual De Instalación, De Utilización Y De Mantenimiento página 11

d: minimum distance of parapet.
L1, L2: footprint.
Sc: installation area (Sc=L1xL2).
5.1.2. guard trac™ plus guardrail
The sizes given in the table below are referenced
in fig. 4.
L1 (mm) L2 (mm)
3560 800
d: minimum distance of parapet.
L1, L2: footprint.
Sc: installation area (Sc=L1xL2).
5.2. Characteristics of the component
parts
For all the parts we have:
P: Weight
L1: Length
L2: Width
H: Height
Sm: Installation surface of the 25 kg weight
• Counterweight (fig. 6)
W L1 L2
(Kg) (mm) (mm)
25 487 222
Reinforced concrete charged at a density of 3.8
kg / l.
Aluminium identification plate.
• Fully equipped double bracket (fig. 7)
W (Kg) L1 (mm)
7 752
The double bracket comes with an anti-slip pad
and 2 spring-mounted cones ensuring the
clamping of each barrier in upright position
inside the bracket.
Materials: - cast iron support with cataphoretic
protection
- Pad in EPDM (rep.1)
- Plastic clamping cone (rep.2)
- Stainless steel cone spring.
d (mm) Sg (m²)
50 3
H Sm
(mm) (m²)
90 0.03
L2 (mm) H (mm)
222 111
• Fully equipped single bracket (fig. 8)
W (Kg) L1 (mm)
4.2 525
The single bracket comes with an anti-slip pad
and a spring-mounted cone ensuring the
clamping of the barrier in upright position inside
the bracket
Materials: - Cast iron support with
cataphoretic protection
- Pad in EPDM
- Plastic clamping cone
- Stainless steel cone spring
• guard trac™ guardrail (fig. 9)
W (Kg) L1 (mm)
8.8 3000
Material: aluminium.
• guard trac™ plus guardrail (fig. 10)
Description W (Kg) L1 (mm) L2 (mm) H (mm)
3m barrier 8.1 3000
2m barrier 6.6 2000
Material: aluminium.
• guard trac™ adjustable guardrail (fig. 2)
Description W (Kg) L1 (mm)
Short
From 1500
adjustable 8
to 2250 (*)
barrier
Long
From 2275
adjustable 9.7
to 3000 (*)
barrier
Guardrail material: aluminium.
Pin: galvanised steel.
(*): per 25 mm section.
• guard trac™ plus adjustable guardrail
(fig. 5)
W (Kg) L1 (mm)
From 2000
11.2
to 2400 (*)
Guardrail material: aluminium.
Pin: galvanised steel.
(*): per 25 mm section.
L2 (mm) H (mm)
161 111
L2 (mm) H (mm)
120 1101
120 1101
120 1101
L2 (mm) H (mm)
120 1105
120 1105
L2 (mm) H (mm)
120 1105
11
GB