Descargar Imprimir esta página

Automatic Operation (Auto Changeover); Airflow Direction; Temporary Operation - Carrier 42NQ Serie Guia De Inicio Rapido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRECAUTIONS FOR SAFETY
• Do not install, repair, open or remove the cover. It may expose you to
dangerous voltages. Ask the dealer or the specialist to do this.
• Turning off the power supply will not prevent potential electric shock.
• The appliance shall be installed in accordance with national wiring
DANGER
regulation.
• Means for disconnection from the supply having a contact separation
of at least 3 mm in all poles must be incorporated in the À xed wiring.
• Do not expose your body directly to cool air for a long time.
• Do not insert your À nger or any article into the air inlet/outlet.
• When an abnormality (burning smell, etc.) occurs, stop the air
WARNING
conditioner and disconnect the power supply or turn off the breaker.
• Do not wash the unit with water. It may cause an electric shock.
• Do not use this air conditioner for other purposes such as preserving
food, breeding animal, etc.
• Do not step or put anything on the indoor/outdoor unit. It may cause
an injury or damage the unit.
• Do not touch aluminium À n because it may cause an injury.
• Before cleaning the unit, turn off the main switch or the circuit
CAUTION
breaker.
• When the unit won't be used for a long time, turn off the main switch
or the circuit breaker.
• It is recommended that maintenance be performed by a specialist
when the unit has been operated for a long time.
1
INDOOR UNIT DISPLAY
Models: 42NQ012, 42NQV012S
FILTER
PRE DEF
TIMER
Models: 42NQ009, 42NQV009S
CLEANING
RESET
TIMER
OPERATION
2
PREPARATION BEFORE USE
Preparing Filters
. Open the air inlet grille and remove the air À lters.
2. Attach the À lters. (see detail in the accessory sheet)
Loading Batteries
. Remove the cover. Insert 2 new
batteries (AAA type) following the
(+) and (–) positions.
2. Push RST : Reset the remote
control.
3. Place the cover back.
3

AIRFLOW DIRECTION

Press
FIX : Move the louver in
1
the desired vertical direction.
Press
SWING: Swing the air
automatically and press again
2
to stop.
For horizontal direction, adjust
3
manually.
Note:
• Do not move the louver manually by others.
• The louver may move automatically positioning by operation mode.
025028.indb 2
1 FILTER (Orange)
2 PRE DEF (DE-FROST) (Orange)
OPERATION
3 TIMER (Yellow)
4 OPERATION (Green)
RESET
5 RESET button
1 OPERATION (Green)
2 TIMER (Yellow)
3 RESET button
4
REMOTE CONTROL FUNCTION
Infrared signal emitter
1
Set louver button (FIX)
2
Auto louver button (SWING)
3
Mode select button (MODE)
4
Reset button (RST)
5
6
On timer button (ON)
7
Off timer button (OFF)
8
Reserve button (SET)
9
Cancel button (CLR)
!
Check button (CHK)
"
ECO button (ECO)
#
Fan speed button (FAN)
$
Start/Stop button (START/STOP)
%
Temperature button (
)
AUTOMATIC OPERATION (AUTO
5
CHANGEOVER)
To automatically select cooling or fan only operation and control fan speed.
. Press MODE : Select AUTO.
2. Press
: Set the desired temperature.
The manufacture setting temperature is 24°C and available range of set
temperature is ±5°C.
6
COOLING / HEAT / AUTO FAN OPERATION
. Press MODE: Select COOL, HEAT or AUTO FAN.
2. Press
: Set the desired temperature.
COOL: Min 7
C, HEAT: Max 30
C, AUTO FAN :
o
o
No temperature indication
3. Press
FAN : Select AUTO, LOW
7
DRY OPERATION
For dehumidiÀ cation, a moderate cooling performance is controlled
automatically.
. Press MODE : Select Dry.
2. Press
: Set the desired temperature.
8
ECONOMICAL OPERATION
To automatically control room temperature, fan speed and operation mode
. Press ECO in the AUTO and COOL operation: Start and stop the
operation.
2. Press MODE or FAN after stopping the operation.
Note:
• Under certain conditions, ECO mode may not provide adequate cooling
due to energy saving features.
9

TEMPORARY OPERATION

In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or
stop without using the remote control.
• Operation mode is set on
AUTOMATIC operation, preset
temperature is 24°C and fan
operation is automatic speed.
1
Hr.ON OFF
%
$
2
SWING
FIX
FAN
#
3
MODE
ECO
RST CHK
4
"
TIMER
!
5
6
9
ON
OFF
SET
CLR
7
8
, MED
, HIGH
.
2/22/07 0:53:47 AM

Publicidad

loading

Este manual también es adecuado para:

42nqv serie38ny serie38nyv serie42nq00942nq01242nqv009s ... Mostrar todo