1. coarse filter (A)
2. microfilter (B)
3. flat filter
Do these steps to clean the filters:
1.
Open the door.
2.
Remove the lower basket.
3.
To unlock the filter system, turn the han-
dle on the microfilter (B) approximately
1/4 anticlockwise.
4.
Remove the filter system.
5.
Hold the coarse filter (A) by the handle
with the hole.
6.
Remove the coarse filter from the mi-
crofilter.
7.
Remove the flat filter from the bottom
of the appliance.
8.
Clean the filters below running water.
9.
Put the flat filter in the bottom of the
appliance. Install the flat filter correctly
under the two guide (C).
10. Put the coarse filter (A) in the microfilter
(B) and push the filters together.
11. Put the filter system in position.
12. To lock the filter system, turn the handle
on the microfilter (B) clockwise until it
lock in position.
13. Install the lower basket.
14. Close the door.
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
cocktail stick.
Care and cleaning
19