Programme Selection Buttons; Multitab Button; Delay Start Button; Function Buttons - Electrolux FAVORIT OPTIMAAA Manual De Instrucciones

6
Control panel
1)
1)
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.

Programme selection buttons

With these buttons you can select the washing programme. Press a programme button,
the related indicator light comes on. Refer to 'Washing programmes' chapter for more data
about the washing programmes.

Multitab button

Press this button to activate/deactivate the multitab function. Refer to the chapter 'Multitab
function'.

Delay start button

Use the delay start button to delay the start of the washing programme with an interval
of 3, 6 or 9 hours. Refer to the chapter 'Setting and starting a washing programme'.

Function buttons

Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To cancel the washing programme in progress or a delay start in progress. Refer to the
chapter 'Setting and starting a washing programme'.
• To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to
the chapter 'Multitab function'.

Setting mode

The appliance must be in setting mode for these operations:
• To set a washing programme.
• To set the water softener level.
• To deactivate/activate the rinse aid.
Press the on/off button. The appliance is in setting mode when:
– All the programme indicator lights come on.
Press the on/off button. The appliance is not in setting mode when:
– Only one programme indicator light comes on.
– A washing programme is set. It is necessary to cancel the programme to go back to the
setting mode. Refer to 'Setting and starting a washing programme'.
Indicator lights
Comes on when it is necessary to fill the salt
container. Refer to 'Use of dishwasher salt'.
After you fill the container, the salt indicator
light can continue to stay on for some hours.
This does not have an unwanted effect on the
operation of the appliance.
Comes on when it is necessary to fill the rinse
aid container. Refer to 'Use of rinse aid'.