Creating A One-Time User Recovery Pin; Deleting The One-Time User Recovery Pin - iStorage DISKASHUR M2 Manual Del Usuario

15. Creating a One-Time User Recovery PIN

The User Recovery PIN is extremely useful in situations where a user has forgotten their PIN to unlock the diskAshur M
To activate the recovery mode, the user must fi rst enter the correct One-Time Recovery PIN, if one has been confi gured. The user PIN
recovery process does not impact the data, encryption key and Admin PIN, however the user is forced to confi gure a new 7-15 digit User
PIN.
To confi gure a One-Time 7-15 digit User Recovery PIN, fi rst enter the "Admin Mode" as described in section 5. Once the drive is in
Admin Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both
KEY ( ) + 4 buttons
2. Enter a One-Time Recovery PIN and press
KEY ( ) button
3. Re-enter your One-Time Recovery PIN and press
KEY ( ) button again
Note: To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid

16. Deleting the One-Time User Recovery PIN

To delete the One-Time User Recovery PIN, fi rst enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both
SHIFT ( ) + 4 buttons
2. Press and hold down both
SHIFT ( ) + 4 buttons again
Note: To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
BLUE LED), press and hold down the SHIFT ( ) button for a second - the
RED LED.
BLUE LED), press and hold down the SHIFT ( ) button for a second - the
RED LED.
www.istorage-uk.com
Solid BLUE LED will change to blinking
solid BLUE LEDs
Blinking GREEN and solid BLUE
a single GREEN LED blink and then back to blinking
GREEN and solid BLUE LEDs
Blinking GREEN and solid BLUE
rapidly blinking GREEN LED and fi nally to a solid
BLUE LED indicating the One-Time Recovery PIN
has been successfully confi gured
Solid BLUE LED will change to blinking
RED LED
Blinking RED LED will become solid
switch to a solid BLUE LED indicating that the One-
Time User Recovery PIN has been
successfully deleted
.
2
GREEN and
LEDs will switch to
LEDs change to a
RED and then
#15