How To Check The Unattended Auto-Lock; Set Read-Only In User Mode - iStorage DISKASHUR M2 Manual Del Usuario

28. How to check the Unattended Auto-Lock

The Administrator is able to check and determine the length of time set for the Unattended Auto Lock time-out feature by simply noting
the LED sequence as described in the table below.
To check the unattended auto-lock, fi rst enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down
SHIFT ( ) + 5
2. Press the KEY ( ) button and the following happens;
a. All LED's (RED, GREEN
b. Each RED LED blink equates to ten (10) minutes.
c. Every GREEN LED blink equates to one (1) minute.
d. All LED's (RED, GREEN
e. LEDs return to solid BLUE
The table below describes the LED behaviour whilst checking the unattended auto-lock, for instance if you have set the drive to
automatically lock after 25 minutes, the
Auto-Lock in minutes
5 minutes
15 minutes
25 minutes
40 minutes
Note: To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid

29. Set Read-Only in User Mode

To set the diskAshur M to Read-Only, fi rst enter the "User Mode" as described in section 13. Once the drive is in User Mode (solid
2
GREEN LED) proceed with the following steps.
1. In User mode, press and hold down both "7 + 6"
buttons. (7=Read + 6=Only)
2. Press KEY ( ) button
Note: 1. If a User set the drive as Read-Only, Admin can override this by setting the drive as Read/Write in
Admin mode.
2. If Admin set the drive as Read-Only, the User cannot set the drive as Read/Write.
#22
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
RED LED will blink twice (2) and the
BLUE
RED LED.
Solid
BLUE
GREEN LED will blink fi ve (5) times.
RED GREEN
0 5 Blinks
1 Blink 5 Blinks
2 Blinks 5 Blinks
4 Blinks
LED), press and hold down the SHIFT ( ) button for a second - the
Solid
and
GREEN
GREEN
Read-Only
www.istorage-uk.com
BLUE LED will change to blinking
LEDs
0
GREEN LED will change to blinking
BLUE LEDs
and BLUE LEDs will change to a solid
LED indicating the drive is confi gured as
GREEN and
GREEN