JTG JT300 2012 Manual De Usuario página 51

JTG RECOMMENDS:

In case of any doubt as to possible adjustments of your motorcycle, please follow the instructions contained
in this manual and/or contact an authorised JTG dealer.

Please read the information contained in this user manual and familiarise yourself with the features of your
vehicle before driving it at maximum power.

It is recommended to establish an initial running-in period of at least 8-10 hours for the engine to bed in,
during this period do not drive at high speed or full throttle. The first hours of use should be at moderate
speed only.

Fuel is highly inflammable. Take care when refuelling and always stop the engine first.

Before running the engine at high speed, it is important to have reached an optimum operating
temperature, especially when starting up the motorcycle or in low temperature conditions.

This motorcycle uses synthetic two-stroke oil mixed with 98-octane fuel in a 1% proportion. Do not use any
other type of lubrication without first consulting with an authorised JTG mechanic.

This motorcycle is designed to carry only one person; it is not permitted to carry a passenger.

For the longest possible service life, keep the motorcycle maintained according to the recommendations in
this manual.

This vehicle has been designed for safe riding, as long as the rider is equipped with the necessary safety gear
(Helmet, body protection, etc.). Take care and ride in a sensible manner.
5