Cooling System - JTG JT300 2012 Manual De Usuario

COOLING SYSTEM

Do not forget that the radiator can get very hot, when
manipulating, take care and let it cool down after
switching off the engine.
Always use coolant (-30°C) for alloy engines when
topping up the radiator.
22
Regularly check the radiator inlet and outlet tubes for
impacts, cracks or leaks that could compromise the cooling.
Also check the radiator alloy fins.
For correct operation of the engine, make sure the level of
the coolant is correct. You can top up the radiator tank
(preferably with the recommended coolant) through the
cap at the top.
Do this with the engine cold and the motorcycle upright,
first open the cap partially by turning anti-clockwise and let