Storage - JTG JT300 2012 Manual De Usuario

STORAGE

If it is necessary to store the motorcycle for a long period of time, the following operations are recommended before storage:

Clean the whole vehicle.

Lubricate or grease the components that need it.

Empty the fuel tank. (Take care with the fuel, which is inflammable and toxic)

Empty the sump, removing the old transmission oil and refilling with new oil (If the engine is cold, it is recommended to
start up and leave running for a few minutes to warm up the oil and favour draining).

Cover the exhaust with a plastic bag, protecting it form the elements.

Any unpainted metal parts that could get rusty should be coated with oil.

Avoid the tyres touching the ground by placing a piece of cardboard or similar material under them.

Protect the motorcycle as much as possible form dust and dirt by covering it with a plastic or canvas sheet.
When putting the motorcycle back into service, first:

Remove the plastic protection used.

Check the oil and lubrication of components.

Check the spark plug.

Adjust type pressure to the recommended value.

Fill the petrol tank.
34