CAMPAGNOLO BRAKES Manual Del Usuario página 22

7
• Block the brake block holder by tightening the 5 mm hex screw (A - Fig. 8) to a tighte-
ning torque of 8 Nm (71 in.lbs).
DANGER!
Always ensure that the closed part of the brake
block holder (B) is facing the forward direction
as indicated in figure 9.
Incorrect mounting of the brake block holder
may cause the brake block to slide out of the
brake block holder and cause accidents, physi-
cal injury or even death.
B
9
22
FRONT
8
REAR
B
8 Nm
A
(71 in.lbs)
ENGLISH