Child Lock; Wipe Protection; Automatic Time Limitation - Thermador MASTERPIECE CIT367TG Guía De Uso Y Cuidado

Recommendations for use
Always use cookware that has not been pre-heated.
▯
Use pots and pans with a flat base. Do not use
▯
containers with a thin base.
Never leave empty cookware, oil, butter or lard to heat
▯
up unattended.
Do not place a lid on the cookware.
▯
Place the cookware on the center of the element.
▯
Ensure that the diameter of the base of the cookware
corresponds to the size of the element.
You can find information on the type, size and
▯
positioning of the cookware in section ~ "Cooking
with Induction"
Activating
Select an element.
1.
Touch the POWER BOOST touch key twice.
2.
The indicator lights up.
˜›Ú
The function is activated.
Deactivating
Select an element.
1.
Touch the POWER BOOST touch key.
2.
The display goes out and the element switches
˜›Ú
back to heat setting
Š
The function is deactivated.
Note: In certain circumstances, the ShortBoost function
can switch itself off automatically to protect the electronic
elements inside the cooktop.

Child lock

You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch LOCK for 4 seconds. The
several seconds. The cooktop is now locked.
Turning the child lock off
Touch LOCK for 4 seconds. The cooktop is now
unlocked.
CAUTION
9
The child lock may be accidentally turned on and off
due to:
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the LOCK touch key.
▯
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
20
.
indicator lights up for
Ú

Wipe Protection

Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the LOCK key. The
lights up. The control panel is locked for 35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate:
To deactivate the function before the time has elapsed,
touch the LOCK key. The
off, the function is deactivated.
Notes
An acoustic signal sounds 30 seconds after activation.
▯
This indicates that the function is about to finish.
The wipe protection lock does not lock the main
▯
switch. The cooktop can be switched off at any time.

Automatic time limitation

If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
indicator / flash alternately in the display.
• œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
indicator above the key
Ú
indicator above the key turns
Ú
"‰ and the residual heat