CST/BERGER LM30 Manual De Instrucciones página 7

1. Turn the unit on by pressing the control button.
2. Press three more times until the "LONG SWEEP" LED is lit. The rotary
ad will quickly scan back and forth to create a laser "chalk line".
3. To direct the sweep toward your target, grab the rotary head to stop its
movement, and wait for rotation pressure to relax (normally within a
few seconds).
Rotate head to your desired position and release.
4. Length of the chalk line will vary depending on the distance of the
Wizard from your working surface; the angle of the long sweep is
approximately 45°. To create a shorter, faster sweep, press the control
button once more ("SHORT SWEEP" LED will light); the angle of the
short sweep is approximately 22°.
Note: The Sweep Function of this unit is intended for indoor use only. Use of
the LM30 in direct sunlight may result in erratic operation of the Sweep
Function.
Use of the LM30 in direct sunlight will not affect any other functions
Remote Control RC30 - (Fig. 5)
Note: Remote control is included with LM30 Interier packages.
The remote controls Fast Rotation Speed, Slow Rotation Speed, Spot Mode,
Long Sweep, Short Sweep, and can be used up to a maximum of 100 feet (30
m) away from the unit. The user must face the control panel for proper oper-
ation of the remote. Requires 2 AA Alkaline batteries.
1. Operates same as the single button on unit
2. Rotate laser beacon counter-clock-wise when in sweep or spot mode
3. Rotate laser head clock-wise when in sweep or spot mode
LM30 Rotary Laser • 7