entrematic Ditec OBBI Manuale Tecnico página 32

If the gearmotor opening direction needs to be modified, proceed as shown in the figure (example
of motor transformation with opening direction from right to left).
blue
brown
Loosen the motor fastening screws.
Rotate the reduction gear by 180°.
blue
brown
With the reduction gear rotated, insert the motor
and cap, and insert the cable.
WARNING: the motor must be assembled so
that the cable remains on the side opposite the
release
1
Extract the motor and the re-
ducer cap and unthread the
motor cable.
180°
4
Insert and fix the motor fastening
screws.
32
2
3
5