Bostitch BFN21PL Manual De Operación Y De Mantenimiento página 12

being fastened. Experiment with the air pressure setting to determine the lowest
setting that will consistently perform the job at hand.
Air pressure in excess of that required can cause premature wear
and/or damage to the tool.
DIRECTIONAL EXHAUST DEFLECTOR
Fig. 8
(FIG. 8)
Adjust directional exhaust deflector (A), so the
exhaust air blast will be directed away from
the operator. The exhaust deflector provides
sixteen detented positions for directing the
exhaust blast away from the operator. Grasp the
deflector and rotate it to the desired position for
A
the current application.
NO-MAR PAD (FIG. 9, 10)
Disconnect tool from air supply and engage trigger lock, before
removing or re-installing no-mar pad.
Fig. 10
Fig. 9
D
F
The no-mar pad (F) is provided to reduce marring of the work surface. The no-mar
pad can be removed, and stored inside the End Cap, Magazine (D), to provide
increased depth-of-drive for toe-nailing applications.
CLEARING A JAMMED NAIL (FIG. 1, 11–13)
Disconnect air line from tool, engage trigger lock and remove
fasteners from magazine before making adjustments or personal injury may
result.
Fig. 11
E
I H
If a nail becomes jammed in the nosepiece, keep the tool pointed away from you
and follow these instructions to clear:
– 12 –