Shut Down; Advanced Menu Controls - DeVilbiss Healthcare SleepCube DV54 Serie Manual Del Usuario

aDVancED mEnu controlS

The display will show "FLX" in the top row of the default screen (between CPAP pressure
and Mode) while SmartFlex pressure relief is operating.
When SmartFlex pressure relief is turned on Full Time, the pressure relief operates at all
times when you are breathing on the device. When SmartFlex pressure relief is set to Delay
Only, the pressure relief operates only during the Comfort Delay period and turns off after
the delay period is finished. When SmartFlex pressure relief is turned OFF, the pressure
relief does not operate.
The device contains a SmartFlex disengagement feature. If a patient is experiencing a
respiratory event while the CPAP is in the relief pressure mode, after a limited time the
CPAP will shift to the prescription pressure and remain at this pressure until normal
breathing resumes.

Shut Down

Press the ON/OFF button to turn the device off. You may also simply remove your mask.
After a few seconds the device will display the message "Mask Off. Please check mask fit." If
you do not put the mask on again the device will automatically turn off in about 20 seconds.
Pressing any button will remove the message from the display.
NOTe– If the DeVilbiss SleepCube does not turn off automatically, the "Auto-OFF" feature may
have been disabled. In this case you must manually turn the device off.
aDVanCeD menU ConTRols
With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through
the items on the display. Not all of the features in the table below are available in all models;
some are optional and some depend on what your physician and/or home care provider has
selected. The table shows the items you may see, and describes the feature associated with
each item. Also, some features are only available in AutoAdjust Mode or with the DeVilbiss
SmartLink™ Therapy Management Module – these are noted in the 'Mode' column below. If
you do not see some of these options, your model or configuration does not support them.
Name
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.
Symbol Function

Pressing this button displays the previous menu option.

Pressing this button displays the next menu option.

These buttons allow you to adjust the setting that is

shown on the display.
EN
SE-DV54-1
13