Autoadjust Patient Menu; Cpap Patient Menu - DeVilbiss Healthcare SleepCube DV54 Serie Manual Del Usuario

aDVancED mEnu controlS
DV54 AutoAdjust Patient Menu Layout
The following chart shows by Mode each Display you will scroll through using the Next or
Previous buttons on the keypad. Pressing the Down key at the Enable Menu Display will
allow you to enter this submenu - then use Next or Previous buttons to scroll through it;
press the Up button to return to main menu. Once the final Display is reached, pressing the
Next button will return you to the first Display.
MENU - AutoAdjust Mode
P:10.0 FLX Auto
Heat:Off
Upper Limit
15.0 cmH2O
Lower Limit
5.0 cmH2O
Delay Time

20 minutes
Delay Pressure
4.0 cmH2O
Tubing Length

1.8 m (6 ft)
SmartFlex Menu
Press 
Enable Menu
Press 
LCD Contrast Adj
50 %
Compliance Meter
123456.7 hours
Firmware Version
V0.20 30/06/2010
Serial Number
HD000005
Adherence Score
83% (25/30)
SmartCode 1-Day
F6CD-37F-357R
Heater setting shown if
DV5HH is attached, FLX
shown if SmartFlex feature
is turned on.
SmartFlex

3
SmartFlex Mode 
Full Time
SmartFlex IRnd

3
SmartFlex ERnd 
3
Exit Menu
Press 
UP () BUTTON
DOWN () BUTTON
Auto-OFF

Disabled
Auto-ON

Enabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Press 
NOTe: There are 5 levels
of SmartCode data. Use
UP  or DOWN  key to
change between levels.
MENU - CPAP Mode
P:10.0 FLX CPAP
Heat:Off
Set Pressure
10.0 cmH2O
Delay Time

20 minutes
Delay Pressure
4.0 cmH2O
Tubing Length

1.8 m (6 ft)
SmartFlex Menu
Press 
Enable Menu
Press 
LCD Contrast Adj
50 %
Compliance Meter
123456.7 hours
Firmware Version
V0.20 30/06/2010
Serial Number
HD000005
Adherence Score
83% (25/30)
SmartCode 1-Day
F6CD-37F-357R
SE-DV54-1
EN
SmartFlex

3
SmartFlex Mode 
Full Time
SmartFlex IRnd

3
SmartFlex ERnd 
3
Exit Menu
Press 
UP () BUTTON
DOWN () BUTTON
Auto-OFF

Disabled
Auto-ON

Enabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Press 
19