Installing The Humidistat - Honeywell Home HE240 Instrucciones De Instalación

Installing the Humidistat

Find the mounting template included in the H8908 Humidistat Installation
1.
Instructions.
Apply the template to the
2.
return duct (see Fig. 3 on
page 6). Make sure the
template is level before
drilling. (Use of a small level
is recommended.)
Remove base bracket from
3.
the H8908.
Slide the foam gasket onto
4.
the base. (See Fig. 14.)
Position the base bracket on
5.
the duct with the arrow up.
Secure the base bracket to
6.
the duct using the four 1 in.
(25 mm) mounting screws
provided with the
humidistat. (See Fig. 15.)
Connect the low-voltage wires to the leads and replace the H8908 case.
7.
See Fig. 16.
Fig. 14. Slide the foam
gasket onto the base.
NOTE:For wall mounting instructions, see the H8908 Installation Instructions.
HE240, HE280 HUMIDIFIER AND INSTALLATION KIT
HUMIDISTAT BASE
Fig. 13. Humidistat base and rear view.
M24733
13
REAR OF HUMIDISTAT
WIRE SLOT HUMIDISTAT WIRES
Fig. 15. Secure the
base bracket to the duct.
M20179
M29879
69-2685ES—01