Connection Of An Electric Catch Or Lock; Connection Of A Gate Mechanism - Extel WEVP 629 E Instrucciones De Uso E Instalación

* option
b. Connection of an electric catch or lock
If the installation includes a catch or an electric lock, provide two extra wires to connect the catch to the monitor
Connect the lock directly to terminals 5K and 6K on the back of the video camera.
Caution : The power supply to the electric catch or lock is to be provided by an independent transformer which
is not supplied in the kit (Extel ref.: WETR 14602).
Important : It is essential that the electric latch or lock installed has a mechanical memory like all products marketed by
Extel. For the wiring diagram please consult the label on the back of the monitor and the back of the video camera. .
c. Connection of a gate mechanism
Connect the gate motor directly to terminals 5K and 6K on the back of the video camera. The video camera con-
stitutes a dry contact without power for the "push button" command of the automatic control.
6
USING
Using the video door phone
When someone presses the external button, the ring tone is heard, the monitor switches on and the visitor's
face appears for 60 seconds. Once the visitor identified, press the
an EXTEL strike or lock with call memory (like all EXTEL strikes and locks), it will remain unlocked after the end
of the electric pulse.
6GB
or
WETR 14602
.
is enough to communicate with the roadside panel.
CFI EXTEL WEVP 629 - 12/2009 - V1
key to communicate with him.
or press
is pressed. It is advisable to use