Breitling EXOSPACE B55 Manual Del Usuario página 20

N.B.: Do not forget to press the crown back once the setting is complete. If
forgotten, the display on the upper screen will indicate
will sound every 30 seconds.
8. ( )
DATE DISPLAY DATE
In mode, pressing P1 will display the date (
TIME
possible with successive presses on P1:
1. Day on the upper screen (ex.:
MoNDAy
screen ( )
DD.MM.yy
2. Week on the upper screen (ex.:
WEEK 25
3. Week on the upper screen (ex.:
WEEK 25
4. Day, month, year on upper screen (ex.:
time on the lower screen (
HH: MM:SS
5. Back to the standard time display.
A long press on P1 will take you back to the standard time display (
9. ALARMS ( to )
AL1 AL7
The watch has seven daily alarms based on local
in hours, minutes and the day of the week.
and a beep
PUSH CRoWN
mode). Various displays are
DATE
, , , etc.) and date on the lower
TUESDAy WED
) and date on the lower screen (
DD.MM.yy
) and time on the lower screen (
HH: MM:SS
for the 28 February 2015) and
28FEB15
)
).
TIME
, which can be configured
TIME
34
a) Setting ( x)
SET AL
• Select the x function by turning the crown.
AL
• Select the alarm to be set by pressing P2 (
• Pull the crown into position 2.
( ) flash.
HoUR
• Adjust the hours by turning the crown and confirm by pressing P2; the minutes
( ) flash.
MINUTE
• Adjust the minutes by turning the crown and confirm by pressing P2; on the
)
upper screen, the seven days of the week flash one after the other from the left,
in other words, from Monday to Sunday (
)
every day and the seven letters are therefore lit up.
• Should one wish to delete one or more days, they must be "deleted" one by one
by turning the crown, each time confirming with a press on P2 which results in
the setting moving to the following day (example of the display on the upper
screen of an alarm set on all five working week days:
N.B.: Pressing P1 reactivates the seven days of the current alarm (
• Adjust by turning the crown, the type of alarm signal desired (display
):
SIGNAL BUZZER
to )
AL1 AL7
x will appear in the upper screen; the hours
SET AL
); by default, the alarm sounds
MTWTFSS
(sound alarm), (vibrating, silent alarm),
VIBRATE
35
).
MTWTF__
).
ALLDAyS
ALARM
(both
BoTH