Alarm Signal; Countdown ( Timer ) - Breitling EXOSPACE B55 Manual Del Usuario
Ocultar thumbs
Ver también para EXOSPACE B55:
- Manual de instrucciones (305 páginas) ,
- Guia de inicio rapido (11 páginas)
Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Pull the crown into position 2 (the upper screen displays
• Set the number of days (
), hours (
DAy
(
), up to 999 days, 23 hours, 59 minutes and 59 seconds, by turning the
SECoND
crown and confirming each time by pressing P2.
• Set the type of alarm signal desired (
alarm),
(vibrating, silent alarm) or
VIBRATE
crown and confirming by pressing P2.
• Decide if you wish the alarm to be recurrent (will ring every 24 hours in future)
or not (
or
), by turning the crown and confirming by pressing P2.
REP oN
REP oFF
• Press the crown back into the neutral position 1.
b) Use
Pressing P1 activates or switches off the alarm (
The alarm sounds for 20 seconds, with a 10 second reminder after 2 minutes. The
upper screen displays
by flashing (alternately with the
ALCU
0). The alarm can be stopped by pressing one of the two pushpieces or the crown.
15. COUNTDOwN (
)
TIMER
a) Setting (
)
SET TMR
•
Select the
function by turning the crown.
TIMER
)
SETALCU
), minutes (
) and seconds
HoUR
MINUTE
display):
(sound
ALARM SIGNAL
BUZZER
(both together) by turning the
BoTH
or
).
ALCU oN
ALCUoFF
(
) if different from
DAy
S
54
•
Pull the crown into position 2 (
SET TMR
(
), minutes (
) and seconds (
HoUR
MINUTE
59 minutes and 59 seconds, confirming it each time by pressing P2.
•
Adjust the type of alarm signal desired (
alarm),
(vibrating, silent alarm) or
VIBRATE
the crown and confirming by pressing P2.
•
Press the crown back into neutral position 1.
b) Use
•
Pressing P1 will start the timer (
TMR RUN
•
Pressing P1 a second time will stop it (
it (
).
TMR RUN
•
When the timer is working, a long press on P2 will reset the original settings
(
).
RESET
During the last 3 minutes, the seconds hand counts counter-clockwise the seconds
and a beep is emitted every second for the final 10 seconds. At 0, an alarm sounds
for 20 seconds, with a 10-second reminder after 1 minute. The upper screen flashes
ž
. The alarm can be stopped by pressing one of the two pushpieces or on
TMR
0
the crown.
) and turning the crown, adjust the hours
) up to a maximum of 99 hours,
SECoND
display):
(sound
ALARM SIGNAL
BUZZER
(both together) by turning
BoTH
).
), while pressing again will restart
TMRSToP
55
Publicidad
Tabla de contenido
