Breitling EXOSPACE B55 Manual Del Usuario página 21

together) or (vibrating alarm alone followed by vibrating and sound
VIB/BUZ
alarm for the reminder) and confirm by pressing P2.
• Press the crown back to neutral position 1. Upon exiting setting, the alarm set is
automatically activated, and is thus in
display was selected, x , or respectively
AL AM
N.B.: If all the days of the week are deactivated, the alarm is automatically deactivated.
On the contrary, when an alarm with no active day is turned to
week are activated.
If the alarm is not configured to sound every day, when it is activated, the upper
screen alternates x with the days activated (ex:
AL oN
no additional indication is given.
b) Use
• A press on P2 will result in displaying the first (
alarms up to the seventh alarm (
AL7
• Pressing P1 activates ( x or x
AL oN AL
the alarm displayed.
• A long press on P2 starts a test of the active alarm with
upper screen; a second press on P2 will stop the test.
mode ( x or, if the 12 hour (AM/PM)
oN AL oN
x ).
AL PM
, all the days of the
oN
); in the opposite case,
M____SS
), followed by the successive
AL1
).
, respectively x ) or deactivates (
AM AL PM
x displayed on the
AL TEST
36
The alarm sounds for 20 seconds, with a 10-second reminder after 2 minutes. The
upper screen displays the name of the active alarm by flashing:
be deactivated by pressing one of the two pushpieces or on the crown.
10. CHRONOGRAPH wITH INTERMEDIATE/SPLIT TIMES AND TACHYMETER (
The
CHR ADD
given recording.
When the
CHR ADD
tically on 0 and becomes the chronograph hand. With each new recording, the
hand goes back to zero and positions itself directly above the second in progress. It
returns to its usual function when the chronograph function is exited.
a) Measuring a single time
• Select the
• Pressing P1 will start the chronograph. The upper screen displays
lower screen the hours, minutes and seconds up to 99 hours, 59 minutes and
59 seconds.
x )
AL oFF
• A second press on P1 stops the chronograph (upper screen:
with the 1/100
• A long press on P2 will put it back to zero.
function allows up to 50 intermediate times to be measured in any
function is selected, the seconds hand positions itself automa-
function by turning the crown.
CHR ADD
th
of a second).
37
to . This can
AL1 AL7
)
CHR ADD
, the
CHR RUN
alternating
CHR ADD