Breitling EXOSPACE B55 Manual Del Usuario página 28

d) Information regarding the landing airport on the upper screen with
followed by the 4 character ICAO code (will display "
introduced); the lower screen displays
e) The take-off time on the lower screen with
screen.
f) The landing time on the lower screen with
g) The flight time on the lower screen with
h) And back to the display xx on the upper screen.
B ADD
If the memory contains several blocks, P2 must be pressed successively in order to
see the parameters of the ensuing blocks. The time of the last block is then auto-
matically displayed with xx on the upper screen.
B ADD
e) Manual introduction of ICAO codes for airports
ICAO codes for take-off and landing airports are introduced through the appli-
cation, as long as the watch is connected to the smartphone. It is nevertheless
possible to introduce these codes manually as follows:
• While rereading a block (see chapter 12.d), pull the crown into position 2, and
the upper screen will initially display the take-off airport,
" " with the first line flashing; while the lower screen displays
----
B
" if nothing has been
----
.
ICAo
xx displayed on the upper
B TKoF
xx showing on the upper screen.
B LDG
xx showing on the upper screen.
B FLGT
xx followed by
B FRoM
.
ICAo
50
xx , • Choose a letter by turning the crown; validate it by pressing P2 and the second
To
line will flash. Repeat the operation for the three other characters.
• The upper screen will then display the landing airport,
while the first line flashes and the lower screen displays
• Select a letter by turning the crown and validate it by pressing P2. The second
line will flash. Repeat the operation for the other three characters.
• Confirm the setting by pressing P2 and/or pushing the crown back once again
into neutral position 1.
f) Deleting one or more blocks
• To delete the active block, press on P2 for a long time when the crown is in
neutral position 1 (
• To delete all the blocks at once, proceed as follows:
– Pull the crown into position 2.
– Press P2 for a long time (
– Press the crown back into neutral position 1.
g) Recovering times
If the watch is connected to the smartphone, various flight data can be recovered
using the smartphone application.
xx
B
).
RESET
)
EMPTy
51
followed by " "
To ----
.
ICAo