5.3 - DISENGAGEMENT MECHANISM
In the case of a fall or accidental impact, the rear derailleur "disengagement" mechanism
may activate. If this has happened, the rear derailleur does not move down to the smallest
sprockets and certainly not to the 1st sprocket.
The following procedure is recommended:
- shift down to the smallest sprocket possible,
- stop pedalling
- operate lever B (Fig.2) repeatedly.
If this doesn't work, re-engage manually, gripping the upper body of the rear derailleur and
pulling the lower body of the rear derailleur towards you (Fig. 3).
After re-engaging, for safety, also check the drop-out/ rear derailleur hanger alignment and
that the rear derailleur itself is operating correctly.
3
ENGLISH
37