5.4 - "RIDE BACK HOME" FUNCTION
If the battery charge runs out while riding or a problem occurs with rear derailleur operation,
the "disengagement" mechanism of the rear derailleur can be used to position the rear
derailleur on the preferred sprocket.
If you think that the battery charge is about to run out, try to use the smallest sprockets
so that you can then use all the sprockets higher than the current rear derailleur position
when the battery runs out.
Grip the upper body of the rear derailleur and push the lower part with your thumb (Fig.
4). While doing this, turn the hand crank slowly to facilitate the shifting of the chain to the
larger sprockets.
Once back home, remember to re-engage the rear derailleur (Fig. 3) and charge the
battery.
4
38
ENGLISH