Information Codes; Checklist - Samsung POWERbot SR2AK9350W Serie Manual Del Usuario

information codes

1
Below information
codes appear on
the display panel
Information codes
2
Turn off the
emergency switch
and check the below
instructions and take
appropriate action
the poWerbot is caught, stuck or trapped while
moving around.
fTurn off the emergency switch and move the POWERbot to another
area.
foreign matter caught in the pet brush.
fTurn off the emergency switch and remove the foreign matter from the
Pet brush.
foreign matter caught in the left Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
foreign matter caught in the right Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
fTurn off the emergency switch and turn it back on.
fWhen information code does not disappear, check if there's any small
foreign matter between the bumper and the main body. If there is, pull
the bumper slightly and remove the foreign matter.
foreign matter accumulated on the obstacle sensor.
fTurn off the emergency switch and clean the front and rear sensor
with a soft cloth.
foreign matter accumulated on the cliff sensor.
fTurn off the emergency switch and clean the cliff sensor with a soft
cloth.
main pCB needs to be checked.
fTurn off and restart the product. If the same problem occurs
repeatedly, a service check is required.
ENGLISH-31
3
Information code
will disappear
when you turn on
the emergency
switch

checklist