Specifications - Snapper LT-200 Serie Manual De Usuario

Hidrotractores
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGINE:
18.5 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
18.5 @ 3600 rpm
Displacement
38 Cu. in (502 cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
48 Oz. (1.4 L)
20 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
20 @ 3600 rpm
Displacement
30.5 Cu. in (582cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
64 Oz. (1.9 L)
22 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
22 @ 3600 rpm
Displacement
40 Cu. in (656cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
64 Oz. (1.9 L)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by,
among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of
products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actu-
al "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating condi-
tions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limita-
tions, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
CHASSIS:
LT Series
Fuel Tank Cap.
Capacity: 3.5 Gallons (13,2 L)
Rear Wheels
Tire Size: 22 x 10-8
Inflation Pressure: 10-12 psi (,68 bar)
Rear Wheels
Tire Size: 20 x 8.0-8
Inflation Pressure: 10-12 psi (,68 bar)
Front Wheels
Tire Size: 15 x 6.0-6
Inflation Press.: 12-15 psi (0,82-0,96 bar)
TRANSMISSIONS:
K46
Type
Hydrostatic Tuff Torq K46
Hydraulic Fluid
10w 30 Premium Engine Oil
Speeds
Forward: 0-5.5 MPH (9.0 km/h)
@ 3400 rpm
Reverse: 0-3.0 MPH (4.6 km/h)
Continuous Torque
170 ft-lbs
Output
Drawbar Rating
227 lbs (103 kg)
Maximum Weight
675 lbs (306 kg)
on Axle
DIMENSIONS:
LT Series
Overall Length
72"
Overall Width
37"
Height
45"
18.5hp Tractor
w/ 38" Mower Deck
480 lbs (218 kg)
20hp Tractor
w/ 42" Mower Deck
494 lbs (224 kg)
20hp Tractor
w/ 44" Mower Deck
532 lbs (241 kg)
22hp Tractor
w/ 50" Mower Deck
560 lbs (254 kg)
37

Specifications

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido