Alignment - Sub-Zero PRO Serie Guía De Instalación Y Especificaciones

IN S TA L L AT I O N

Alignment

LEV EL I NG
Once the unit is in position, turn the front leveling legs
clockwise to adjust the height. The rear height adjustment
can be made from the front of the roller base. Using a
socket, turn the 3 / " hex bolt clockwise to raise the unit or
8
counterclockwise to lower. Use the lowest torque setting
when using a power drill. Do not turn the rear leveling legs
by hand. Refer to the illustration below.
When the unit is properly leveled, door and drawer adjust-
ments are less likely to be necessary.
Level the unit to the floor, not the sur-
IMPORTANT NOTE:
rounding cabinetry. This could affect the operation of the
unit, such as door closing.
REAR
ADJUSTMENT
FRONT
LEVELING LEG
Leveling
WARNING
To reduce the possibility of the unit tipping forward, the
front leveling legs must be in contact with the floor.
3 / "
8
subzero.com | 11