Tabla de contenido
Publicidad
66
Troubleshooting
It does not hold the rims.
It damages alloy rims.
1. Tool plastic protection worn out.
• Replace the tool plastic protection.
2. Wrong distance between tool and rim.
3. Repeat the locking procedure by pushing the wheel
locking tool downwards.
• Check the correct operation of the locking ring nut
and that no foreign body blocks its movement. Call
the service centre for assistance.
Tower bangs when tilting.
1. Low pressure.
• Check air pressure in the supply line.
2. Tower tilt cylinder faulty.
• Call the authorised service centre for assistance
Publicidad
Tabla de contenido
