Disposing Of The Product - Chicco BebeCare easy-tech Instrucciones De Uso

of time with the smartphone and the child on board, the app is
capable of notifying the server of the anomaly and responding
with a specific warning.
An optional service can, in fact, be activated through the Chicco
Cloud to send a warning message to selected contacts, infor-
ming them that the driver may have forgotten his/her smar-
tphone in the car, since the car has been parked for an exten-
ded period of time with the child on board.
The service can be activated through the "Settings/Notifica-
tions" section of the Chicco BebèCare App.
NO NETWORK SIGNAL WARNING
If the driver's smartphone is unable to communicate with the
Chicco Cloud for an excessive amount of time, the app will send
a notification informing the driver that his/her smartphone has
no reception.
In addition, an optional service can be activated through the
Chicco Cloud to send a warning message to selected contacts,
informing them that the driver's smartphone is not sending
status updates properly and will not be able to send warning
messages in the event of an emergency.
The service can be activated through the "Settings/Notifica-
tions" section of the Chicco BebèCare App.
1.6 PERIODIC NOTIFICATION OF CHILD IN THE CAR FOR
A PROLONGED PERIOD OF TIME
If the child remains in the car seat with Chicco BebèCare easy-te-
ch activated for more than 30 minutes, a push notification will
appear on the smartphone, accompanied by a brief acoustic signal.
The user can disable only the acoustic signal on the "settings/no-
tifications" screen.
1.7 BATTERY
Chicco BebèCare easy-tech works with 1 CR2032 bat-
tery. You can monitor the level of the battery found in
Chicco BebèCare easy-tech equipment through the APP.
If the level is low, the user can replace the battery with
another with the same characteristics on their own, ma-
king sure they are the right way round.
To replace the battery, the user can proceed indepen-
dently by opening the equipment (Fig. 4) and completely
separating the white cover from the blue component. Re-
move the screw (Fig. 5), access the battery compartment
(Fig. 6), replace the battery respecting the polarity (Fig. 7),
screw back (Fig. 8) and fit the blue component inside the
white shell again (Fig. 9).

1.8 DISPOSING OF THE PRODUCT

Follow the instructions provided below for disposal (Para-
graphs 1.7.1 – 1.7.2.).
1.8.1 THIS PRODUCT COMPLIES WITH
THE DIRECTIVE 2012/19/EU.
The crossed bin symbol on the appliance indicates that
the product, at the end of its life, must be disposed of
separately from domestic waste, either by taking it to a
separate waste disposal site for electric and electronic
appliances or by returning it to your dealer when you buy
another similar appliance, or leaving it free of charge at
distributors with a sales area of electrical and electronic
equipment of at least 400 sqm without any obligation
to make a purchase. The user is responsible for taking
the appliance to a special waste disposal site at the end
of its life. If the disused appliance is collected correctly as
separate waste, it can be recycled, treated and disposed
of ecologically; this avoids a negative impact on both the
environment and health, and contributes towards the
recycling of the product's materials. For further infor-
mation regarding the waste disposal services available,
contact your local waste disposal agency or the shop
where you bought the appliance.
1.8.2 COMPLIANT WITH EU DIRECTIVE
2006/66/EC as amended.
The crossed bin symbol on the batteries or the product
packaging indicates that, at the end of their life, they must
be disposed of separately from domestic waste, either by
taking them to a separate waste disposal site for batteries
or by returning them to your retailer when you buy simi-
lar rechargeable or non-rechargeable batteries. Chemical
symbols (Hg for mercury, Cd for cadmium, Pb for lead)
printed beneath the crossed-out wheeled bin symbol
indicate the type of substance contained in the battery.
The user is responsible for bringing batteries, at the end
of their life, to the appropriate collection facilities in order
to facilitate treatment and recycling. The correct separate
waste disposal of your old toy will help prevent potential
negative consequences for the environment and human
health and favour the recycling of the materials of which
the product is made. Illegal disposal of the product by the
user will damage the environment and human health. For
further information regarding the waste disposal services
available, contact your local waste disposal agency or the
shop where you bought the appliance.
DECLARATION OF COMPLIANCE.
Hereby, Artsana S.p.A. declares that the radio equipment
type ET123FL is in compliance with Directive 2014/53/
EU. The complete text of the EU Declaration of Com-
pliance is available at: www.chicco.com/declarations. In
accordance with European Commission Decision No.
2000/299/EC dated 06/04/2000, the frequency band
used by this product has been harmonised for all EU
Countries and this is therefore a Class 1 product which
can be used in all European Union Countries.
The equipment works together with the Bluetooth®
Low-Energy standard.
• Frequency ranges: 2.402 GHz – 2.480 GHz ISM band;
• Channels: 40 channels, each with a band with equal
to 2 MHz;
• Maximum transmission power: +3 dBm
• Standard Radio: 802.15.1;