Current Measuring - Steren MUL-605 Manual Del Usuario

Current measuring

Never try to measure current when the voltage between the open circuit and the
ground is higher than 250V.
Never place the test cables in parallel with a circuit or component when they are
connected to the terminals.
1. Remove the power supply and dischar-
ge the capacitors of the circuit.
2. Adjust the knob to current measuring
range µA / mA / A.
3. Insert the black connector into the COM
terminal.
To make a measuring under than 400 mA
insert the red connector into
to measure between 400 mA and 10 A
insert it in A terminal.
4. Open the circuit. Connect the tips in the
circuit in a way the current to flow through
of multimeter (serial connection).
5. Activate the energy in the circuit again.
Press to change to AC.
36
terminal;