Display Function Introduction - Gree GCF220BKNA Manual Del Usuario

Display Function Introduction

Display of Nixie Tube
(1) Ambient humidity is displayed during normal
operation.
(2)Time is displayed when setting timer.
(3) Set humidity is displayed when setting humidity.
(4) Sensitivity degree d1, d2 or d3 of dust is displayed
when setting sensitivity of dust.
(5) Sensitivity degree o1, o2 or o3 of odor is
displayed when setting sensitivity of odor.
Example:
Sensitivity degree of dust
LED Lamp for Water Shortage
When LED lamp for water shortage blinks,
there is water shortage for water tank. It
reminds user of fi lling water.
Both conditions below must be met when LED
lamp blinks:
(1) Humidifying mode has been set;
(2) Set humidity is higher than ambient humidity.
LED Lamp for Child Lock
When child lock function is turned on, other
buttons in the unit and remote control will be
locked to prevent child wrongly operating the
unit.
(1) After pressing child lock button in remote
control for 2 seconds, the LED lamp of
child lock will be on and child lock function
is activated. If any other button is pressed,
LED lamp of child lock will blinks and
buzzer will sound.
(2) Press button of child lock for 2 seconds to
release child lock.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
3
6
1
Sensitivity degree of odor
10
Fan Speed Bar
It displays current fan speed. One column
means silence; Three columns mean low
fan speed; Five columns mean medium fan
speed; Seven columns mean high speed.
Silence
Med. fan speed
Cleaning and Replacement
When LED lamp for cleaning or replacement
is on, it reminds user of cleaning or replacing
fi lter of the unit.
(1) Cleaning When LED lamp for cleaning
is on, it means unit has operated for
continuous 480 hours. It reminds user of
cleaning cleanable parts of the unit,
such as fi lter. In standby mode ,When
pressing buttons Sleep+Timer, LED
lamp for cleaning will be off and timing
counter will recount time;
(2) Replacement When LED lamp for
replacement is on, it means the unit has
operated for continuous 2000 hours. It
reminds user of replacing fi lter so as to
keep good performances on dust
removal; In standby mode,When pressing
buttons Sleep+ Timer, LED lamp for
replacement is off and timing counter will
recount time.
Low fan speed
High fan speed