Maintenance For Water Tray And Filter Sub-Assy - Gree GCF220BKNA Manual Del Usuario

Maintenance for Water Tray and
Filter Sub-assy
1.Remove of water tray and fi lter sub-assy
(1) Remove water tray (See P9).
(2) Pull out the water tray and remove the fi lter
sub-assy.
● Hold the bottom concave of water tray and pull out.
● Slowly pull out the water tray as there's water in the
tray.
● Hold up the bottom of water tray when moving it.
2.Assembly of water tray and fi lter sub-
assy
1. Assembly of water tray
Assemble fi lter
①
sub-assy.
Assemble the water tray and fi lter as the picture
shows direction.
Assemble the water tray and fi lter sub-assy
●
as original sample.
Incorrect assembly might cause operation
failure.
2. Assembly of water tank. (See P9)
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Press it until a
②
"crack" is heard.
16
3.Water tray
Maintenance once a month or whenever there's
standard peculiar smell or dirt
Maintenance
water clean
method
● Wipe it with soft cloth or brush to get rid of the dirt.
● Wipe the scale with soft cloth or brush dipping
with water or Citric acid warm water, then wash
with water.
Requirement
● Do not remove the fl oater and degerming agent
box.
● The unit cannot operate normally without the
fl oater and the water will be with odour soon
without the degerming agent box.
Degerming agent box.
●
For different water quality and environment, the
water in water tray will be color changed
because of the scale. Maintain the water tray as
above stated.
4.Floater fall off from the water tray
● Please assemble it as following picture.
Floater
Correct assemble:
1. Assemble the fl oater
from the lower of
bulge on water tray.
2. Insert the shaft of
fl oater into water tray
hole.
Floater
Incorrect assemble:
The fl oater hangs
at the bulge of the
fl oater.