1. Remove the dust collector assy (as following picture shows), then remove the fi lter
behind the collector.
Press the clamp on dust collector rack by hand, to remove the fi lter.
●
2.Assemble new fi lter
Fill the starting use date on fi lter's label with signature pen (Y/M)
●
Assemble the fi lter into dust collector rack, be noted that the clamp should be
●
proper assembled and the white side should be kept outward.
Assemble the whole dust collector into the unit. (see preparation before use)
●
Filter cotton replacement method
Service life for replacement
Take out the fi lter sub-assy, remove the fi lter cotton as above steps. (see P8 for replacement
method)
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
when the unit is operated for accumulative 2000 hours