Drive PainAwayPro With Heat Manual De Instrucciones página 17

Remote Operation
As shown above, the Electronic Pulse Stimulator could be operated independently by
pressing its buttons (ON/OFF button, intensity increase/decrease buttons, mode/timer
selection buttons and heat/temperature button). As the optional accessory, the remote
control could provide a secondary operation way to wirelessly control the functions
mentioned above. At any time, you could switch to manually operate the device itself by
pressing its buttons to deal with any issues that may arise.
1. Follow the above instruction to install the electrode onto the device, place on the
body area, and turn on the device.
2. Recharge the battery of the remote if needed by inserting the USB cable to the
top of the remote, which could connect to the adapter included or any certified
adapters.
3. Switch the ON/OFF button to turn on the remote, indicated by its first LCD
display on.
Note: You could press and release the lock/unlock button on the remote to
lock/unlock the buttons on the remote and device. When the buttons are locked,
the lock icon on the remote appears, and you could not operate the buttons on
the remote and device. However, you still could turn the remote and device off by
switching the On/Off button.
4. Pressing and releasing the "+" button on the remote would increase the intensity
of the device, while pressing and releasing the "-" button on the remote would
decrease the intensity of the device. Each time when the intensity
increase/decrease once, the intensity bar on the remote will accordingly
increase/decrease once.
Note: With the increase of intensity (total of 20 levels), you may experience
sensations like tingling, vibration, pain, etc. Therefore, gradually increase the
intensity, and stop increasing when a comfortable level is reached.
5. Press and release the "HEAT" button on the remote for the first time to turn on
the heat Level 1 of up to 104
the LCD display; press and release the "HEAT" button for the second time to
adjust to Level 2 of up to 109.4
flashing on the LCD display; press and release the "HEAT" button for the third
time to turn off the heat, indicated by the HEAT indicator stop flashing.
o
F, indicated by the first HEAT indicator flashing on
o
F, indicated by the second HEAT indicator
15