Performance Specifications; Cleaning And Maintenance; Trouble Shooting - Drive PainAwayPro With Heat Manual De Instrucciones

Performance Specifications

Power Source
Number of Output Modes
Timer Range (minutes)
Dimensions (mm) [L x W x D]
Waveform
Shape
Maximum Output Voltage
Maximum Output Current
Maximum Pulse Duration
Maximum Frequency

Cleaning and Maintenance

Please use a wipe to clean the device first, and then use a dry cloth to wipe it again. The
electrodes coming with the device are disposable and should be replaced when they lose
their adhesiveness. Contact the seller for replacements. Replacement Electrodes, Item#
RTLAGF-1010, comes with 1 small and 1 large electrode.

Trouble Shooting

If your device is not operating properly, please check below for common problems and
suggested solutions. If the recommended action does not solve the problem, please contact the
seller.
Stimulation is weak or non-existent
• Be sure skin is clean and pads are firmly attached to skin.
• The battery is low and needs to be charged.
Devise does not turn on
• Check if battery is low and needs to be charged.
Electrodes are not sticky
• The pads will lose adhesiveness over use. Please contact the distributor or dealer
for replacements.
Skin turns red
• Stop to treat another area.
• If problem persists, contact your physician.
Wireless control not connected
• Restart the device and wireless controller to re-connect automatically.
• Switch to operate the device itself manually.
3.7V Battery
8 preset modes
10-60
89 x 77 x 18 mm
Biphasic
Rectangular
46V@500Ω
92mA@500Ω
100µSec
160Hz
18