Drive PainAwayPro With Heat Manual De Instrucciones página 18

6. There are total of 8 preset stimulation modes. Press and release the "M/T" button
on the remote to select a desired pulse mode, indicated by the flashing of the
selected mode on the LCD display.
7. The default timer is 30 min. Pressing and holding the "M/T" button could select a
desired timer in the order of 30, 40, 50, 60, 10, and 20 min, indicated on the LCD
display.
8. When the countdown timer is up, the remote and device will turn off
automatically. The remote and device could be also turned off by switching the
On/Off button on the remote, indicated by the LCD display off.
Note: When the battery of the remote is running low, its battery icon will flash,
meaning it is time to recharge the battery.
If using the device for the first time, you may start from the default Mode 1, which
combines the different frequencies. If you expect to use the specific TENS or EMS
mode, please refer to the following for details.
Use as TENS
The Electronic Pulse Stimulator with Heat includes the following TENS frequencies,
69Hz (Mode 2), 1.2 Hz (Mode 4), 100Hz (Modes 5 and 6), and 160Hz (Modes 8). The
device could be placed directly on the treatment site where you are experiencing pain
(such as pain associated with sore and aching muscles and pain associated with
arthritis). For example, if the treatment site is on the leg, place the TENS device above
the pain site, and select one of the modes mentioned.
Arthritis involves inflammation on joints of the body, usually producing pain and
stiffness. The electrode is placed on or near the area of the arthritis pain. The TENS
mode of the device generates electrical pulses that are sent via the electrode for pain
relief.
Use as EMS
The Electronic Pulse Stimulator also includes the EMS frequency, 12.5-55.6Hz (Mode
3) and 20Hz (Mode 7). The device could be placed directly on the body area where you
are expecting the muscle firming and strengthening. For example, if the body area is the
arm, place the device on the arm site, and select Mode 3 or 7.
Also, the EMS mode could help temporarily increase local blood circulation in the
healthy muscles of lower extremities through the electrode pad which is positioned on
the lower extremity.
Recommended Practice for Both TENS and EMS:
• Duration suggested for each body area is 30 min and 2 times per day. Consult with
your physician for longer and more frequent uses.
• Start from the lowest intensity and gradually adjust the intensity to a comfortable
level at a scale from 1 to 20.
• Good skin care is important for a comfortable use of device. Be sure the treatment
site is clean of dirt and body lotion.
16