Publicidad
Idiomas disponibles
Idiomas disponibles
4. Maintenance and Storage
• After work ends, clean the
• While being transported the
equipment bag or equipment box).
• Avoid contact with oils or greases. If unavoidable, clean as soon as possible with fine detergent
and ample water (40°C). Always dry naturally, never near fire or other heat sources.
• For questions about disinfecting the
Attention: Strictly follow the cleaning rules!!
5. Materials Information
The
positioning lanyard
Rope made of polyamide
Karabiner hook made of aluminum, steel, stainless steel
6. Operational Lifetime
The operational lifetime depends on the particular conditions of use. According to experiences today,
one can assume an operational lifetime of 4 to 6 years under normal operating conditions. The build
year of the
positioning lanyard
7. Inspection
• Prior to starting work, inspect the
Check the function karabiner hook. Check the legibility of the labelling.
• Should there be any doubts about the safety of the systems or its components, they must be
replaced immediately. This must be done by the manufacturer or a trained person.
• The inspection prior to use can be omitted for certain equipment parts intended for emergencies if
they were packed or sealed by a trained person.
• As needed, but at least one a year, have an inspection done by the manufacturer or a trained
person.
Attention: Damaged positioning lanyard may not be used.
• Damaged
positioning lanyard
authorized repair shop for maintenance and re-inspection.
Attention:
No modifications or additions may be made to the product without the prior
written consent of the manufacturer.
Repairs may only be carried out by the manufacturer or a repair shop authorised
by the manufacturer in compliance with the procedures specified by the
manufacturer.
A set of use instructions/inspection log book is delivered with every
with the equipment.
You absolutely must follow the use instructions for the products that are used with the
as well as the specifically applicable accident protection regulations.
lanyard
Notified agency involved:
Stand: 06.11.2013
positioning lanyard
positioning lanyard
positioning lanyard
consists of the following materials.
is written on the shrink tubing.
positioning lanyard
must be taken out of services and returned to the manufacturer or an
DEKRA EXAM GmbH
Dinnendahlstraße 9, 44809 Bochum
0158
, dry it an store in dry, well-ventilated dark rooms.
must be kept in a suitable transport container (e.g.
, please contact the manufacturer.
and karabiner hook for wear and damage.
. It must be kept
positioning lanyard
positioning
Publicidad
