Feed Roller - HP LaserJet 5100 Mantenimiento

Step 6 Replace the optional 500-sheet tray
pickup rollers and feed roller
Note If no optional 500-sheet tray is installed in the printer, skip this step and
go to "Replace the fuser" on page 22.
Remove the 500-sheet tray from the feeder and set the feeder upside
down on the work surface.
Feed roller removal
Pinch the feed roller tab (Figure 12, item 1), and then slide the roller
off of the shaft.
Figure 12 Removing the optional 500-sheet tray feed roller
18
Installing the printer maintenance kit
ENWW