Publicidad
Idiomas disponibles
Idiomas disponibles
Other Controls and Features
Volume Control:
The VG3 volume can be adjusted when playing music
or during speakerphone operation by pressing or press
and holding the + (up) or – (down) volume adjustment
buttons on the keypad. The current volume level will be
displayed with blue LED's on the volume bar graph.
➤ Mobile devices that support the AVRCP protocol can
adjust the volume from the mobile devices
volume slider control.
Fuel Gauge:
Press the Power button for (1) second and beep is
heard to display the current battery level bar graph us-
ing a combination of RED=Low, YELLOW=OK, GREEN=-
Full LEDs. The bar graph will move counter-clockwise as
the battery discharges.
➤ The fuel-gauge and amber low battery LED indicators
will NOT be accurate until at least two full charging/
discharging cycles have been completed.
Volume Level Indication
Blue LEDs
illuminate in
clockwise direction
to indicate
volume level.
Volume
down
button
Battery Status Indication
Yellow
(Ok
Battery)
Red
(Low
Battery)
Keyboard Lock
The VG3 has two different keypad lockout mechanisms
to prevent un-intended or accidental operation. Both are
disabled by default. When enabled, all keypad functions
except for power on/off will be ignored.
Child Lock:
To Enable or Disable, press and hold the mute button
for (5) seconds and release. The top most BLUE LED
will flash indicating the keypad is locked and child lock
is active. Power cycling the unit will disable the keypad
child lock.
Auto Lock:
To Enable or Disable Auto-Lock, press and hold the
mute button for (10) seconds and release. The volume
bar graph will blink twice when enabled and once when
disabled. When enabled, the keypad will "Auto-Lock"
after (3) minutes of no keypad interaction. The top
GREEN LED will blink indicating the keypad is locked The
Volume
up button
Auto-Lock will remain enabled or disabled when power
cycling the unit.
Green
Temporarily unlock the keypad for use while Auto-Lock
(Charged
Battery)
is active by conducting an "Unlock Swipe". This can be
done by sliding your finger quickly between the power
button and any other function button, being sure to re-
lease your finger while it is still over the "other function"
button. The volume bar graph will blink indicating that
the keypad is unlocked. Keypad will auto-lock again after
Orange
Power
(3) minutes of no interaction.
LED
Keypad Lock Indicator:
Flashing Blue:
Child Lock Active
Flashing Green:
Auto Lock Active
Mute
button
7
Publicidad
