Markings And Symbols; Dryer Model Number Identification - Parker PNEUDRI MXLE ADVANTAGE Serie Manual De Uso

1.1 Markings and Symbols

The following markings and international symbols are used on the equipment or within this manual:
Caution, Read the User Guide.
Risk of electric shock.
Highlights actions or procedures which, if not performed
correctly, may lead to personal injury or death.
Highlights actions or procedures which, if not performed
correctly, may lead to damage to this product.
Highlights actions or procedures which, if not performed
correctly, could lead to electric shock.
Read the User Guide
Use a fork lift truck to move the dryer.
REPLACE WITH VAC
PUMP HOSE ASSEMBLY
Replace with Vacuum Pump hose assembly
Attention: Endplate must be kept with additional purge
ATTENTION
plates.
END PLATE MUST BE KEPT
WITH ADDITONAL PURGE
PLATES
The dryer may start automatically without warning.

1.2 Dryer Model Number Identification

Model Number:
Controller Type
LE = Low Energy
Number of Drying Banks
No. of individual dryers installed
Number of Drying Columns
02C
03C
03
04
05
06
07
08
2
MX LE 1 05
Wear ear protection
Pressurised components on the system
Remote control. The dryer may start automatically without
warning.
Conformité Européenne
When disposing of old parts always follow local waste
disposal regulations.
Waste electrical and electronic equipment should not be
disposed of with municipal waste.
Warning: More than one live circuit
The pump will continue to run for 10 minutes after
the Stop control is pressed.
AIR
Manufactured By
Parker Hannifin Manufacturing Ltd
Domnick hunter Filtration & Separation division
Dukesway, Team Valley Trading Estate, Gateshead,
Tyne & Wear, NE11 0PZ, United Kingdom
Tel: +44(0)191 4029000, Fax +44(0)191 4826296
Email: dhisales@parker.com, Web: http//www.parker.com.dhfns
Dryer Part Number
MXLE105
Dryer Type MXLE105
Serial Number Date Volume
SN --/--/-- 281 L
Electrical Supply
380V - 420V 3ph 50Hz 7500W
440V - 480V 3ph 60Hz 9000W
Short Circuit Ra ng: 900A
Minimum Opera ng Temperature
o o
5 C 41 F
Maximum Opera ng Temperature
o o
50 C 122 F
Minimum Opera ng Pressure
4 barg 58 psig 0.4 Mpa
Maximum Opera ng Pressure
13 barg 189 psig 1.3 Mpa
Test Pressure
16.5 barg 239.5 psig 1.65 Mpa
0038