Zanussi ZSG20100 Manual De Instrucciones página 24

WHAT TO DO IF...
Problem
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The lamp does not op-
erate.
There is sparking in the
cavity.
There is sparking in the
cavity.
The turntable set
makes scratching or
grinding noise.
The appliance stop to
operate without a clear
reason.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING! Refer to Safety chapters.
24
Possible cause
The appliance is deactivated.
The appliance is not plugged in.
The fuse in the fuse box is blown.
The door is not closed properly.
The lamp is defective.
There are metal dishes or dishes
with metal trim.
There are metal skewers or alumini-
um foil that touches the interior
walls.
There is an object or dirt below the
glass cooking tray.
There is a malfunction.
We recommend that you write the data here:
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse blows
more than one time, contact a
qualified electrician.
Make sure that nothing blocks the
door.
The lamp has to be replace.
Remove the dish from the appli-
ance.
Make sure that the skewers and
foil does not touch the interior
walls.
Clean the area below the glass
cooking tray.
If this situation repeats call the Au-
thorised Service Center.
The necessary data for the service centre is on the
rating plate. The rating plate is on the appliance. Do
not remove the rating plate from the appliance.
........................................
........................................
........................................
GENERAL INFORMATION
CAUTION! Do not block the air vents.
If you do that, the appliance can
overheat.
Remedy