Operating The Optional Bulk Paper Feeder; Loading Paper - Kyocera MITA PF-8E Manual Del Usario

Operating the Optional Bulk Paper Feeder

This chapter describes how to load paper in the feeder and to select the
feeder as the paper source.
When the tray is rising or descending, please observe
the following precautions.

Loading Paper

Once the feeder has been installed in accordance with the instructions
provided previously; you can prepare to load paper. Before loading
paper, you must adjust the side plates inside the feeder to the actual
width of the paper to be loaded.
The legal-size paper is not usable with the bulk paper
feeder. For details on paper size, see the printer's
User's Manual.
Turn printer power on. The paper feeder is turned on
1.
simultaneously.
Gently open the feeder's tray cover. The paper tray will lower.
2.
10
pf8-Eng.pm6
Keep your fingers out of the slot on the inner side
of the feeder.
While the tray is descending, keep your hands out
from under the tray.
Do not push down on the tray or pull it upward.
10 12/19/00, 8:22 PM