SDMO TECHNIC 15000 TE C Manual De Utilización Y Mantenimiento página 13

1. Preface
2. General description
3. Preparation before use
4. Using the generator set
5. Safety features
6. Maintenance schedule
7. Maintenance procedures
1. Preface
1.1. Recommendations
Warning
The information contained in this manual is taken from technical data available at the time of print. In line with our policy of continually
improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger:
Danger risk of electric
1 2
1.3. Warnings
You are likely to encounter several warning symbols in this manual.
This symbol indicates a definite risk to a person's health and life. Failure to follow the corresponding
instruction poses serious risks to the health and life of those concerned.
Danger
This symbol draws attention to the potential risk to a person's health and life. Failure to follow the corresponding
instruction may pose serious risks to the health and life of those concerned.
Warning
This symbol indicates a dangerous situation if the warning is not heeded.
Failure to follow this instruction could result in less serious injury or damage.
Important
Read this manual carefully before use.
The safety advice and the usage and maintenance instructions for the generating set must always
be strictly adhered to.
Earth
shock
1 - Important: refer to the documentation accompanying the generating set.
2 - Warning: emission of toxic exhaust gases. Do not use in a confined or badly ventilated area.
3 - Stop the engine before filling with fuel.
3
Contents
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Cable sizes
12. EC Declaration of conformity
13. Serial numbers
Important: oil is not supplied with the generating set.
Danger:
risk of burns
Example of an identification plate
(A): Model
(B): CE/GOST marking
(when applicable)
(C): Guaranteed acoustic
power level
(D): Maximum power
(E): Nominal power
(F): Power factor
(G): Weight
Before starting the generating set,
always check the oil level.
(H): Current amperage
(I): Current frequency
(J): Current voltage
(K): Protection rating
(L): Reference standard
(M): Model number