Maintenance
REPLACING FILTERS
When filters need replacing, exchange with similar. Also replace
filters that are damaged with punctures, bends, or broken
frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the
power .
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W/300 Lumen
LED light or 25W - 35W/JDR 16, GU10 twist and lock base light
bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) counter-clockwise and pull it out to
remove it .
- Push in the new bulb (2) and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14
1
2