Maintenance; Replacing Filters; Replacing Light Bulbs - Presenza QR065 Manual Del Usuario

Maintenance

REPLACING FILTERS

When filters need replacing, exchange with similar filters with
stainless steel clips. Also replace filters that are damaged with
punctures, bends, or broken frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the power.

REPLACING LIGHT BULBS

When light bulbs burn out, replace them with a 5W/300 Lumen LED
light or 25W-35W/JDR 16, GU10 twist and lock base light bulb.
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) counter-clockwise and pull it out to
remove it .
- Push in the new bulb (2) and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are inserted
correctly .
DANGER:
power switch on the junction box before performing
maintenance . Touching circuitry inside the range hood while
it is energized will result in death or serious injury .
WARNING:
filters will increase the risk of fire.
WARNING:
turned on . Do not touch bulbs until they are switched off
and cooled . Touching hot bulbs could cause serious burns .
13
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Turn off the power circuit breaker or the
Failure to replace worn out or damaged
Light bulbs can become extremely hot when
2
CONGLOMKB .COM
1